Features:
1. MBL series adopts Taiwan Shengbang decelerating motor, with stable performance, long life and large torque.
2. The cutter teeth are made of imported SKD-11 material.
3. Adopting the integrated design of tooth knife and claw knife, coarse crushing and fine crushing are carried out at the same time,
Evenly pulverized with very little dust, it can be mixed with new materials immediately.
4. The reducer and the main shaft are connected by a coupling, which is stable in operation and low in noise.
5. The feeding nozzle and receiving barrel are made of stainless steel, equipped with PC transparent board, which is convenient for viewing materials.
6. No screen design, evenly crushed particles, and very little dust.
7. Rigorous structure, space saving, convenient and quick cleaning.
Electrical Control:
MBL slow speed machine side crushing series, suitable for injection molding machine, with machine side, recycling device, dryer, etc. to form a set of fast recycling system. This system can eliminate the complicated intermediate links in the recycling process, greatly avoiding the secondary pollution and waste of manpower, materials, and achieving the best recycling effect. It is widely used for on-site crushing and recycling of injection molding machine side nozzle materials and a small amount of defective products.
Standard:
Model | Smash caliber | Crushing ability | Rotating speed | Hook knife | Fixed knife | Rotary knife | PowerKW | Weight |
Before | Rear | Smash | Recycle | |
MBL-2315 | 230*165 | 3 | 26 | 1 | 2 | 1 | 2 | 0.75 | 0.55 | 200 |
MBL-2325 | 230*255 | 5 | 26 | 2 | 3 | 1 | 3 | 1.5 | 0.55 | 240 |
MBL-2335 | 230*345 | 8 | 26 | 3 | 4 | 1 | 4 | 2.2 | 0.55 | 280 |
MBL-2925 | 290*255 | 12 | 26 | 2 | 3 | 1 | 3 | 2.2 | 0.55 | 300 |
MBL-2935 | 290*345 | 15 | 26 | 3 | 4 | 1 | 4 | 2.2 | 0.55 | 350 |
Equipped with special receiving barrel for suction machine, add "A" after the model
Equipped with immediate recovery device, add "AS" after the model
Machine voltage 3 phase/380V/50HZ
